4th June

1 month since last post!!  Bad me - but you dont need info on garden work and tree felling and log splitting.  Had crappy weather for most of the month but summer has arrived in the last week.  When Nuts is in the water I wont be spending much time in the garden so got to keep Mrs Nuts happy now.

Bits for the trailer arrived (eventually) from Vevor.  Most packages take about 1 month to arrive here except from Amazon which can be from 3 days to 3 weeks.  Temu about 1 month but free shipping to the middle of nowhere which I think is a good deal.

I ordered 4 acrow jacks which I had to cut down as they were too long.  I welded bases and support struts so I could bolt them onto the trailer or use them as a cradle on the ground.  My trailer is not street legal so the plan is to load it onto a car recovery lowbed for transport to the marina (and bring my fishing boat home).  I also plan to load the keel onto the trailer first and position Nuts above to be lowered down for the bonding.  Maybe it will be easier to lift the keel up to the bottom with threaded rods to be removed once the main keel bolts are in position.  I went down the road this afternoon and measured the heights of overhead wires for clearance.  There is 1 electric wire and 1 internet fiberoptic cable that might be a problem but can push them up while passing underneath.

Finished splicing the guardrails and fitted this afternoon.  6mm Dyneema. Pullpit and stantion bases got their overdrilled holes epoxy filled and re drilled before fitting with SikaFlex.

 I reprogrammed the Victron MPPT for LiFePo4 charge profile as recommended by the battery manufacturer.  Now I just have to swap out the battery.  They are the same size so my mounting does not need to be changed.

My buddy Lex had lots of fun fishing on my little boat.

Ive been out a few times and off to sea again tomorrow with Sister Nuts to try some deep drop (250m) to see what is lurking down there.